Common causes:

• Mineral buildup in showerheads or faucets
• A leak somewhere in the system
• Failing pressure regulator
• Municipal supply issues
• Clogged or corroded pipes (especially in older homes)

What to do:
Try cleaning faucet aerators first. If that doesn’t help, call for a pressure test. A licensed plumber can quickly isolate the cause, especially if a hidden leak is involved.

Warning signs:

• Unexplained spikes in your water bill
• Warm spots on your floor
• Sound of running water when everything is turned off
• Cracks in walls or flooring
• Damp carpet or foundation

What to do:
Slab leaks are common in Seagoville due to shifting soil. Don’t wait—early leak detection can save you thousands in damage.

Possibilities:

• Localized clogs (hair, grease, food, soap scum)
• Deeper blockages caused by tree roots, collapsed pipes, or buildup
• Outdated cast iron or clay pipes deteriorating

What to do:
If plungers and store-bought drain cleaners aren’t working, it’s time for a camera inspection. Hydro jetting may be the best long-term solution to restore full flow.

Pros:

• Endless hot water
• Lower energy bills
• Takes up less space
• Longer lifespan than traditional tanks

Things to consider:

Higher upfront cost
May require electrical or gas line upgrades
Better for households with consistent demand

For Seagoville homeowners:
Hard water can kill traditional tanks early. Many locals are switching to tankless for energy efficiency and fewer maintenance issues.

Most likely causes:

• Sewer gas leak
• Dry P-traps in unused sinks or floor drains
• Faulty venting in your plumbing system
• Gas line issue (if smell is near stove or heater)

What to do:
Vent issues or sewer leaks should be inspected ASAP. Plumbers can use smoke testing or gas detection tools to find the exact source safely.

Possible reasons:

• Jammed blades (foreign object stuck)
• Overheating motor with tripped reset switch
• Worn-out internal components

DIY tip:
Turn it off, unplug it, and use an Allen wrench to try turning the blade manually from underneath. If that doesn’t work, call for a quick repair or replacement.

Yes, especially in older Seagoville homes.

Tree roots are a common cause of sewer backups because they can grow into small cracks or joints in sewer lines and block the flow.

What to do: Have a licensed plumber remove the roots with a professional sewer machine and root-cutting blade. A camera inspection can then check for any pipe damage that may need repair.

Top reasons:

• Sediment buildup in the tank
• Failing heating element or thermostat
• Water heater too small for household demand
• Leaks or valve issues

What to do:
Schedule a water heater flush and inspection. In hard water areas like Seagoville, tanks often need descaling to restore efficiency.

Usually not.
This is often called “water hammer,” and it can result from:

• Sudden valve shutoff
• Poorly secured pipes
• High water pressure
• Air in the lines

Solution:
A plumber can install water hammer arrestors or adjust pressure to quiet your system and prevent long-term damage.

General rule:

Every 1–2 years for newer homes

Annually for homes over 20 years old

Immediately if you’re buying or selling a home

Why it matters in Seagoville:
Aging infrastructure and soil conditions can lead to hidden problems. Regular inspections help catch leaks, clogs, and wear before they become emergencies.

Yes, we are fully licensed and insured to ensure your peace of mind and protection during our services.

Hydro-jetting uses high-pressure water to thoroughly scour the inside of your pipes. It is mainly used for clearing soft stoppages and buildup (such as grease, soap scum, and sludge), making it ideal for routine maintenance and non-root blockages.

Important Note: Hydro-jetting DOES NOT clear tree roots. If tree roots have invaded your lines, an experienced licensed plumber will need to clear them using a sewer machine with a cutter blade instead.